Epoxy Flooring in Red Bank, SC

Red Bank was rural not long ago, and the epoxy flooring work we do there follows its change to a suburb. The area grew from 8,811 people in 2000 to 10,924 in 2020, and new housing developments and national retailers came with it. Housing units rose from 3,498 to 4,617 over those twenty years. A large share of the garages here belong to homes built during that boom.

Family garages work hard

Red Bank households lean toward families. In the 2020 census, 32.0% of households had children under 18 and 47.0% were married couples. Census QuickFacts puts persons per household at 2.61 and the owner-occupied rate at 77.1%. In a family home the garage is a mudroom, bike rack, sports closet, freezer room and parking spot at once. That calls for a floor that takes:

• Bikes, scooters and wagons rolling in and out
• Muddy cleats and wet shoes
• Spilled drinks, paint from school projects and drips from the car
• Hours of play when it rains

A flake floor with a polyaspartic topcoat handles all of that. The chips hide dirt between cleanings, and the texture keeps small feet steadier on a wet floor.

New concrete still needs prep

Builder slabs in newer subdivisions are usually flat and sound. They also tend to be finished smooth, and some carry a curing compound. Both block a coating from bonding. We diamond grind every floor to open the surface. If a home is brand new, we ask when the slab was poured, because fresh concrete needs time to cure and dry before it takes a coating.

Creeks and damp ground

Red Bank Creek runs east through the area to Congaree Creek, part of the Congaree River watershed, and Crystal Lake and Saxe-Gotha Millpond impound it. Homes near low ground can have slabs that stay damp. Moisture rising through a slab is one of the main reasons coatings blister and peel. We test moisture before quoting. If readings are high, we discuss a moisture-tolerant primer or tell you the floor is not a good candidate.

Beyond the garage

• Patios and pool decks: textured, light-colored coatings that stay cooler and give grip.
• Bonus rooms and home gyms on a slab: metallic epoxy or solid-color systems.
• Shops and outbuildings: thicker epoxy for tools and equipment.

Choosing colors and chips

Families often ask which flake blend hides dirt best. Mid-tone blends with grays, tans and some darker chips hide red clay, grass and tire marks better than very light or very dark floors. A full broadcast, where chips cover the whole base coat, gives the most texture and the most even look. We bring sample boards to the estimate so you can see them in your own garage light.

Get a Free Estimate